Description
CB-CNW-V3000
Cambium 60GHz cnWave V3000 Client Node excl. PoE injector
Datasheet:
CB-CNW-V3000
Swiftly implement the Wi-Fi backhaul speed required using the 60 GHz cnWave V3000. Equipped with a 44.5 dBi high-gain antenna incorporating beamforming technology, the client nodes can facilitate speeds of up to 7.6 Gbps through channel bonding, catering to both point-to-multipoint (P2MP) and point-to-point (PTP) configurations.
- Supports 57 to 66 GHz
- Up to 7.6 Gbps (3.8 Gbps UL and 3.8 Gbps DL) with channel bonding
- Easy installation with auto-beam forming
- Low latency < 1 ms
- 802.11ay technology with Terragraph certification
Category | Specification |
---|---|
Spectrum | 57 to 66 GHz in a single SKU |
Frequency Range | 2.16 GHz, 4.32 GHz* |
Carrier Bonding* | Up to 2 adjacent channels |
Mode of Operation | PMP or Mesh, PTP |
Interface | – 1 x 100/1000/10G BaseT with PoE In |
– 1 x 100/1000 BaseT with 802.3at PoE Out | |
– 1 x SFP+ | |
Channel Access | TDMA/TDD |
Ethernet Protocol | Supported IPv4, IPv6 |
Network Management | cnMaestro, HTTP, HTTPS, SNMP v2c & v3 |
MTU | 4,000 bytes |
VLAN* | 802.1ad (QinQ), 802.1Q with 802.1p priority |
QoS* | 4 Level QoS, DSCP and VLAN Tag |
Security Encryption | 128-bit AES (optional) |
Firmware Security | Signed Firmware Images |
Performance | – Modulation & Coding Schemes: MCS-0 (BPSK) to MCS-12 (16-QAM) |
– Latency: < 1 ms | |
– Maximum EIRP: 60.5 dBm | |
Antenna | – Gain: 44.5 dBi |
– Type: Integrated | |
Beamforming | – Scan Range: +/- 2ยบ azimuth, +/- 1ยบ elevation |
– Beam Width: 0.8ยบ | |
Powering | – Type: Passive PoE (42-57V) without AUX PoE Out in use |
Power Consumption | – 55 W with AUX PoE Out in use |
– 30 W without AUX PoE Out in use | |
Physical Environmental | – IP66/67 |
Temperature | -40ยบC to 60ยบC (-40ยบF to 140ยบF) |
Mean Time Between Failure | > 40 years |
Weight | < 4 kg (8.8 lbs) |
Dimensions | – W x H x D: 346 mm x 414 mm x 344 mm |
(13.6 in x 16.3 in x 13.5 in) | |
Wind Survival | 200 km/h (124 mi/h) |