Description
PM33-HF010S
10KVA On-Line UPS, 3-phase input and output with internal battery pack
Rating: 10 KVA / 9 KW
Battery Pack: 40 x 12V7Ah Sealed Batteries
USB Comms: Standard
SNMP Card: Optional – includes software
Wave Form: Pure Sine Wave
Recharge: 80% after 9 hours
Run Times @ given load: 25% for 36 Minutes, 50% for 18 Minutes, 75% for 9 Minutes
UPS Dimensions (W) x (L) x (H) and Weight: 250mm x 840mm x 715mm @ 51.5Kg
Battery Pack Dimensions (W) x (L) x (H) and Weight: 950mm x 880mm x 1190mm @ 140Kg
|
Model No. |
PM33-HF010S |
PM33-HF020S |
|
Capacity VA (Watts) |
10 000 (10 000) 20 000 (18 000) |
|
|
Input Voltage |
3-Phase + Neutral + Earth 380V / 400V / 415 VAC line to line |
|
|
Input Voltage Range |
304 to 478 V line to line at full load |
|
|
Input Frequency Range |
40Hz to 70Hz |
|
|
Total Harmonic Distortion (THDi) |
< 4% < 3% |
|
|
Input Power Factor |
< 0.99 |
|
|
Output Voltage On Inverter (adjustable) |
380V / 400V / 415 VAC line to line 230V AC + 3% line to neutral |
|
|
Voltage Regulation |
+ 1.5% |
|
|
Frequency on Inverter |
50 Hz Crystal Controlled (+ 0.01%) |
|
|
Inverter Wave Form |
Sine |
|
|
Total Harmonic Distortion (THDu) |
< 1% For Linear Loads ; < 5.5% Non-Linear Loads |
|
|
Transfer Time |
Zero |
|
|
Efficiency At Full Load |
> 95% |
|
|
Overload Capability |
110% for 60 minutes, 150% For 1 minute, then by-pass |
|
|
Battery Voltage |
+ 240VDC |
|
|
Batteries |
Internal battery pack, 40 x 12V Internal battery pack, 40 x 12V 7Ah Sealed Lead Acid 12Ah Sealed Lead Acid |
|
|
Re-Charge to 90 % |
+ 8 Hours |
|
|
Backup Time With 50% Load (50% Load) |
18 Minutes 20 Minutes |
|
|
Backup Time With 75% Load (75% Load) |
9 Minutes 10 Minutes |
|
|
Ambient Operation |
3000M Max Elevation, -10 to 40 C, 0 to 90% Humidity |
|
|
Audible Noise At 1 M |
< 60% Load 52 dbA / > 60% Load 56 dbA |
|
|
Short Circuit Protection |
Yes |
|
|
Low Battery Shut down |
Yes |
|
|
Controls |
Mains Fail Alarm (Slow intermittent beep), Low Battery Alarm (Continuous beep), Mains on indicator, Charging indicator, By-Pass Indicator, LCD Display (Full UPS Status reporting), Diagnostic software via USB port (SNMP and dry contact optional) |
|
|
UPS Dimensions (w x d x h) mm & Weight |
250mm x 840mm x 715mm 350mm x 730mm x 1335mm @ 135Kg @ 200Kg |
|
