Description
PM33-HF040S
Powerman 40KVA On-Line Double Conversion 3-Phase Input and Output UPS
Datasheet:
PM33-HF040S
Specification | Details |
---|---|
Capacity VA (Watts) | 40,000 (36,000) |
Input Voltage | 3-Phase + Neutral + Earth, 380V / 400V / 415 VAC line to line |
Voltage Range | 304 to 478 V line to line at full load |
Frequency Range | 40Hz to 70Hz |
Total Harmonic Distortion (THDi) | < 3% |
Input Power Factor | < 0.99 |
Output Voltage on Inverter (Adjustable) | 380V / 400V / 415 VAC line to line, 230V AC + 3% line to neutral |
Voltage Regulation | + 1.5% |
Frequency on Inverter | 50 Hz Crystal Controlled (+ 0.01%) |
Inverter Waveform | Sine |
Total Harmonic Distortion (THDu) | < 1% for Linear Loads, < 5.5% for Non-Linear Loads |
Transfer Time | Zero Detection Time, Switch time ≤ |
Efficiency | > 95% at Full Load |
Overload Capability | 110% for 60 minutes, 150% for 1 minute, then by-pass |
Battery Voltage | ± 240VDC |
Batteries | Internal battery pack, 80 x 12V 12Ah Sealed Lead Acid (AGM) |
Re-Charge to 90% | ± 8 Hours |
Backup Time with 50% Load | 15 Minutes |
Backup Time with 75% Load | 7 Minutes |
Ambient Operation | Max Elevation: 3000M, -10°C to 40°C, 0 to 90% Humidity |
Audible Noise at 1M | < 60% Load 52 dbA / > 60% Load 56 dbA |
Protection Features | Short Circuit Protection, Low Battery Shutdown |
Controls | Mains Fail Alarm (Slow intermittent beep), Low Battery Alarm (Continuous beep), Mains on indicator, Charging indicator, By-Pass Indicator, LCD Display (Full UPS Status reporting), Diagnostic software via USB port (SNMP and dry contact optional) |
Approvals | IEC 62040-1-2008 / IEC 62040-2-2006 / IEC 62040-3-2011 ISO 9001-2005 Quality, ISO 14001-2005 Environmental Management |
UPS Dimensions (w x d x h) & Weight | 500mm x 840mm x 1400mm, Weight: 412Kg |