Description
PM11-HF010RTE
Powerman 10KVA On-Line Double Conversion Long Run Time UPS
Datasheet:
PM11-HF010RTE
The PowerMan PM11-HF UPS range employs a double conversion design principle and operates with a 220/240V 50Hz, single-phase AC input and output. Utilising state-of-the-art high-frequency, transformer-less technology, this UPS remains small and compact. The incoming mains power is directly converted into DC, which charges the batteries and powers the inverter, subsequently running the load. This ensures your sensitive electronic equipment is protected from potentially damaging spikes, surges, or dips. In the event of a complete mains failure, the batteries will continue to power the inverter and start to discharge rather than charge. There is no interruption to the output when switching to or from the mains. This design concept offers optimal protection by supplying clean power from the inverter at all times.
The UPS features a built-in Static Bypass, allowing it to transfer the load to normal mains under certain emergency conditions, such as an overload. Once the condition causing the bypass is resolved, the unit will automatically return to its normal operating mode.
- On-line, double conversion technology
- Transformer-less
- Unity power factor and high efficiency rate
- 3-step inverter design
- generator compatible input
- DC start capability
- Sealed deep cycle gel battery technology
- Communication ports (USB standard, SNMP optional)
- LCD display
| Specification | Details |
|---|---|
| Capacity VA (Watts) | 10,000 (10,000) |
| Input Voltage | 230V AC ± 25% |
| Input Frequency | 50 Hz ± 10% |
| Transfer Time | Zero |
| Output Voltage on Inverter | 230V AC ± 3% |
| Frequency on Inverter | 50 Hz Crystal Controlled |
| Inverter Wave Form | Sine |
| Total Harmonic Distortion (THD) | < 1% (Linear Load) |
| Efficiency at Full Load | > 95% |
| Overload Capability | 150% for 30 seconds, then bypass |
| Batteries | External battery pack, 32 x 12V 100Ah Sealed Lead Acid (Gel) |
| Re-Charge to 90% | ± 8 Hours |
| Backup Time with 50% Load (5000 watts) | ± 6 Hours |
| Backup Time with 75% Load (7500 watts) | ± 2.5 Hours |
| Ambient Operation | 3000m Max Elevation, -10 to 40°C, 0 to 90% Humidity |
| Audible Noise at 1m | < 60% Load: 52 dBA / > 60% Load: 56 dBA |
| Short Circuit Protection | Yes |
| Low Battery Shutdown | Yes |
| Controls | Mains Fail Alarm (Slow intermittent beep), Low Battery Alarm (Continuous beep), Mains on indicator, Charging indicator, Bypass Indicator, LCD Display (Full UPS Status reporting), Diagnostic software via USB port (SNMP and dry contact optional) |
| UPS Dimensions (w x d x h) mm & Weight | 438mm x 600mm x 172mm @ 18Kg |
| Battery Dimensions (w x d x h) mm & Weight | 2 x (470mm x 780mm x 1190mm @ 550Kg) |
