Description
XPQ1785
Axis Explosion Protected PTZ Camera
Datasheet:
XPQ1785
- Worldwide hazardous area certifications
- Smoke alert analytics
- Zip-stream and Light-finder
- HDTV 1080p with 32x optical zoom
- -60 ℃ to 60 ℃(-76 °F to 140 °F)
| Category | Details |
|---|---|
| Camera | |
| Image Sensor | 1 / 2.8″ progressive scan RGB CMOS |
| Lens | 4.3–137 mm, F1.4–4.0 Horizontal field of view: 60°–2.3° Vertical field of view: 39°–1.3° Autofocus |
| Minimum Illumination | Color: 0.16 lux at 50 IRE F1.4 B / W: 0.03 lux at 50 IRE F1.4 |
| Shutter Speed | 1 / 66500 s to 1 s |
| Pan / Tilt / Zoom | Pan: 360° endless, 0.6–200° / s Tilt: ±90°, 0.6–200° / s 32× optical zoom and 12× digital zoom, total 384× zoom 100 preset positions, preset accuracy ±0.05° Guard Tour, Control queue |
| System on Chip (SoC) | |
| System on Chip (SoC) | ARTPEC-6 |
| Memory | 1024 MB RAM, 512 MB Flash |
| Video | |
| Video Compression | H.264 (MPEG-4 Part 10 / AVC) Baseline and Main profiles, Motion JPEG |
| Resolution | 1920 × 1080 HDTV 1080p to 160 × 90 |
| Pixel Density @ Zoom | 25 m (82 ft): 1912 px / m 50 m (164 ft): 956 px / m 250 m (820 ft): 191 px / m |
| Frame Rate | With WDR: Up to 25 / 30 fps (50 / 60 Hz) in all resolutions Without WDR: Up to 50 / 60 fps (50 / 60 Hz) in all resolutions |
| Video Streaming | Multiple, individually configurable streams in H.264 and Motion JPEG Axis Zipstream technology in H.264 Controllable frame rate and bandwidth VBR / MBR H.264 |
| Image Settings | Saturation, contrast, brightness, sharpness, Forensic WDR, defogging, white balance, exposure mode, exposure zones, compression, mirroring, electronic image stabilization, text and image overlay, dynamic overlays Rotation: 0°, 180° Scene profiles: forensic, vivid, traffic overview, backlit entrance |
| Network | |
| Network Protocols | IPv4, IPv6 USGv6, ICMPv4 / ICMPv6, HTTP, HTTPS, HTTP / 2, TLS, QoS Layer 3 DiffServ, FTP, SFTP, CIFS / SMB, SMTP, mDNS (Bonjour), UPnP®, SNMP v1 / v2c / v3 (MIB-II), DNS / DNSv6, DDNS, NTP, NTS, RTSP, RTCP, RTP, SRTP / RTSPS, TCP, UDP, IGMP v1 / v2 / v3, DHCP v4 / v6, ARP, SSH, LLDP, CDP, MQTT v3.1.1, Secure syslog (RFC3164 / 5424, UDP / TCP / TLS), Link-Local address (ZeroConf) |
| System Integration | |
| System Integration | Open API with VAPIX® and AXIS Camera Application Platform ONVIF® Profile G / S / T One-click cloud connection |
| VMS Compatibility | AXIS Camera Station Edge / Pro / 5, plus Axis partner VMS |
| Event Conditions | Device status: temperature alerts, IP / network issues, system ready Edge storage: ongoing recording, storage issues I / O: manual trigger, virtual input MQTT subscribe PTZ: malfunction, movement, preset reached, PTZ ready Scheduled, recurring, video degradation, day-night mode, stream open, tampering |
| Event Actions | Day-night mode, defog, guard tours, overlay text, preset positions, SNMP trap messages, status LED, WDR mode, MQTT publish Notifications: email, HTTP, HTTPS, TCP Video: record to SD card / network share Upload images / clips via FTP, SFTP, HTTP, HTTPS, network share, email |
| Installation Aids | Built-in pixel counter |
| Analytics | |
| Analytics – Included | Smoke alert, AXIS Video Motion Detection, AXIS Fence Guard, AXIS Loitering Guard, AXIS Motion Guard, active tampering alarm, gatekeeper |
| Analytics – Supported | AXIS Perimeter Defender, AXIS Cross Line Detection, third-party apps via AXIS Camera Application Platform |
| Cybersecurity | |
| Cybersecurity – Edge | Signed OS, brute-force delay protection, digest authentication, OAuth 2.0, ADFS support, password protection, AES-XTS-Plain 64 256-bit SD card encryption |
| Cybersecurity – Network | IEEE 802.1X (EAP-TLS, PEAP-MSCHAPv2), IEEE 802.1AE (MACsec PSK / EAP-TLS), HTTPS / HSTS, TLS v1.2 / v1.3, NTS, X.509 PKI, host-based firewall |
| Cybersecurity Docs | AXIS OS Hardening Guide, Vulnerability Management Policy, Security Development Model, Software Bill of Material (SBOM) |
| General | |
| Casing | IP66 / IP67 / IP68-rated, electropolished ASTM 316L stainless steel, corrosion-resistant Wiper included |
| Power | Max: 150 W Input: 100–240 VAC |
| Connectors | Two M25 × 1.5 entries 3-pole for power (0.2–3.0 mm²) 2-pole for 48 VDC AUX out (max 14.4 W) RJ45 10BASE-T / 100BASE-TX SFP cage |
| Storage | Pre-installed AXIS Surveillance microSDXC Card 128 GB Supports SD card encryption Supports NAS recording See axis.com for SD / NAS recommendations |
| Operating Conditions | –60°C to 60°C (–76°F to 140°F), Start-up: –40°C Humidity: 10–100 % RH (condensing) |
| Storage Conditions | –40°C to 65°C (–40°F to 149°F), Humidity: 0–98 % RH (non-condensing) |
| EMC Approvals | EN / IEC 55032 Class A, EN / IEC 61000-3-2 / 3-3 / 6-1 / 6-2 / 55035, FCC Part 15 Subpart B Class A, ICES-3(A) / NMB-3(A), RCM AS / NZS CISPR 32 Class A |
| Environmental Ratings | IEC / EN 60529 IP66 / IP67 / IP68, IEC 60068-2-6 / -27 / -64, EN / IEC 62262 IK10 (IK08 front glass), UL 50E / CSA C22.2 No 94.2 Type 4X |
| Safety Approvals | EN / IEC 62368-1, UL 62368-1, CSA C22.2 No. 62368-1, IS 13252 |
| Explosion Certifications | ATEX, IECEx, cMETus, INMETRO, IA, OSHA Taiwan, PESO, KCs, EAC Ex, UKCA (pending) Detailed list includes: ExVeritas 20ATEX0651X, IECEx EXV 20.0017X, MET E115198, CPEx 22.0478 X, MASC MS / 22-8127X, TD100043, 526087 / 4, 23-KA4BO-0066X / 0067X |
| Dimensions | 240 × 301 × 372 mm (9.45 × 11.85 × 14.63 in) |
| Weight | 23 kg (50.7 lb) |
| Included Accessories | Washer nozzle, M25 to ¾” NPT adapters, connector kit, installation kit |
| Optional Accessories | AXIS TQ1301-E Pole Mount (stainless steel, 5.3 kg, 190 × 234 × 250 mm, max 150 kg) AXIS TQ1001-E Wall Mount (stainless steel, 3.8 kg, 170 × 150 × 350 mm, max 150 kg) Pole mount must be combined with wall mount More available at axis.com |
| Languages | English, German, French, Spanish, Italian, Russian, Simplified Chinese, Japanese, Korean, Portuguese, Traditional Chinese, Dutch, Czech, Swedish, Finnish, Turkish, Thai, Vietnamese |
| Warranty | 5-year warranty |
