Description
DS-3E1508-EI
Hikvision 8 Port Gigabit Smart Switch
Datasheet:
DS-3E1508-EI
- 8x Gigabit RJ45 port
- Gigabit network access design
- Network topology management, alarm push, network health monitor
- Solid high-strength metal shell
- Reliable fan-free design
| Category | Details |
|---|---|
| General | |
| Shell | Metal material, fan-free design |
| Net Weight | 0.36 kg (0.79 lb) |
| Gross Weight | 0.660 kg (1.46 lb) |
| Dimensions (W × H × D) | 170.00 mm × 27.60 mm × 93.10 mm (6.69” × 1.09” × 3.67”) |
| Operating Temperature | 0 °C to 40 °C (32 °F to 104 °F) |
| Storage Temperature | -40 °C to 85 °C (-40 °F to 185 °F) |
| Operating Humidity | 5% to 95% (no condensation) |
| Relative Humidity | 5% to 95% (no condensation) |
| Power Supply | 5 V DC, 1 A |
| Installation Mode | Desk-Mounted / Wall-Mounted |
| Max. Power Consumption | 5 W |
| Power Consumption in Idle | 3 W |
| Surge Protection | 6 kV |
| Network Parameters | |
| Ports | 8 × Gigabit RJ45 port |
| MAC Address Table | 4 K |
| Switching Capacity | 16 Gbps |
| Packet Forwarding Rate | 11.91 Mpps |
| Internal Cache | 1.5 Mbits |
| Software Functions | |
| Link Aggregation | Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 2 aggregation groups. |
| HPP | Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilisation rate. 3. Display topology information. 4. Display the alarm status. 5. Restart ports and devices. 6. Remotely upgrade the device. |
| Port Isolation | Ports 1 to 8: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group. |
| Loop Prevention | Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Support 802.1w RSTP. |
| VLAN | VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN. |
| System Maintenance | Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Support 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating. |
| Approval | |
| EMC | CE-EMC, FCC, IC, RCM |
| Safety | CB, CE-LVD (EN 62368-1: 2014+A11: 2017) |
| Chemistry Compliance | CE-RoHS, WEEE, Reach (Regulation (EC) No.19072006) |
