Planet 8-Port 10/100/1000T + 2-Port 100/1000X SFP Managed 802.3at PoE Switch, 14.88Mpps@64Bytes, Power Requirements-100~240V AC, 50/60Hz

R9,870.83 (Incl. VAT)

In stock

Description

WGSD-10020HP

L2+ 8-Port 10/100/1000T + 2-Port 100/1000X SFP Managed 802.3at PoE Switch

Physical Port

  • 8-Port 10/100/1000BASE-Tย Gigabit Ethernet RJ-45 withย IEEE 802.3af / 802.3atย PoE Injector
  • 2 100/1000BASE-X mini-GBIC/SFP slots, SFP type auto detection
  • RS-232 DB9 console interface for basic management and setup
  • Power over Ethernet
  • Complies with IEEE 802.3at Power over Ethernet Plus
  • Backward compatible with IEEE 802.3af Power over Ethernet
  • Up to 8 ports for IEEE 802.3af / at devices powered
  • Supports PoE power up to 30.8 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m
  • PoE Management
  • Total PoE power budget control- Per port PoE function enable/disable- PoE Port Power feeding priority- Per PoE port power limitation- PD classification detection- PD alive check

Layer 2 Features

  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Storm Control support
  • Broadcast / Multicast / Unicast / Unknown-unicast
  • Supportsย VLAN
  • IEEE 802.1Q tagged VLAN- Up to 255 VLANs groups, out of 4095 VLAN IDs- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)- Private VLAN Edge (PVE)- Protocol-based VLAN- MAC-based VLAN- IP Subnet-based VLAN- Voice VLAN- Management VLAN
  • Supportsย Spanning Tree Protocol
  • STP, IEEE 802.1D Spanning Tree Protocol- RSTP, IEEE 802.1w Rapid Spanning Tree Protocol- MSTP, IEEE 802.1s Multiple Spanning Tree Protocol- STP BPDU Guard and BPDU filtering
  • Supportsย Link Aggregation
  • IEEE 802.3ad Link Aggregation Control Protocol (LACP)- Cisco ether-channel (Static Trunk)- Maximum 5 trunk groups, up to 5 ports per trunk group- Up to 20Gbps bandwidth (full duplex mode)
  • Provides port mirror (many-to-1)
  • Port Mirroring to monitor the incoming or outgoing traffic on a particular port
  • Loop protection to avoid broadcast loops
  • Layer 3 IP Routing Features
  • Supports maximum 32 software static routes and route summarization
  • Quality of Service
  • Ingress Shaper and Egress Rate Limit per port bandwidth control
  • 8 priority queues on all switch ports
  • Traffic classification
  • IEEE 802.1p CoS- TOS / DSCP / IP Precedence of IPv4/IPv6 packets- IP TCP/UDP port number- Typical network application
  • Strict priority and Weighted Round Robin (WRR) CoS policiesTraffic-policing policies on the switch port
  • DSCP remarking
  • Multicast
  • Supports IGMP snooping v1, v2 and v3 for IPv4 multicasting network
  • Supports MLD snooping v1 and v2 for IPv6 multicasting network
  • Querier mode support
  • IGMP snooping port filtering
  • MLD snooping port filtering
  • MVR (Multicast VLAN Registration)

Security

  • Authentication
  • IEEE 802.1x Port-based / MAC-based network access authentication- Built-in RADIUS client to co-operate with the RADIUS servers- TACACS+ login users access authentication- RADIUS / TACACS+ users access authentication
  • Access Control List
  • IPv4 / IPv6 IP-based ACL- MAC-based ACL
  • Source MAC / IP address binding
  • Port Security for Source MAC address entries filtering
  • DHCP snoopingย to filter distrusted DHCP messages
  • Dynamic ARP Inspectionย discards ARP packets with invalid MAC address to IP address binding
  • IP Source Guardย prevents IP spoofing attacks
  • Auto DoS rule to defend DoS attack
  • IP address access management to prevent unauthorized intruder

Management

  • IPv4 and IPv6 dual stack management
  • Switch Management Interfaces
  • Console / Telnet Command Line Interface- Web switch management- SNMP v1, v2c, and v3 switch management- SSH / SSL secure access
  • User Privilege levels control
  • System Maintenance
  • Firmware upload/download via HTTP / TFTP- Configuration upload / download through Web interface- Dual Images- Reset button for system reboot or reset to factory default- Built-in Trivial File Transfer Protocol (TFTP) client
  • Four RMON groups (history, statistics, alarms, and events)
  • IPv6ย / NTP / DNS management and ICMPv6
  • BOOTP and DHCP for IP address assignment
  • DHCP Relay
  • DHCP Option82
  • NTP (Network Time Protocol)
  • Link Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
  • Cable diagnostic technology provides the mechanism to detect and report potential cabling issues
  • PLANET Smart Discovery Utility for deploy management

 
Data sheet:
 | WCCTV

Please refer to our Privacy Policy
We will send an SMS to this number as soon as your quote is ready.
Provide an additional landline or mobile number to contact you.
Left Menu Icon
Cart Menu Button Image0Right Menu Icon
Your Cart