Planet 24-Port 10/100/1000T + 4-Port 10G SFP+ Stackable Managed Switch, 95.23Mpps, Power Requirements-AC 100~240V, 50/60Hz

R43,164.77 (Incl. VAT)

1 176.18 per month
Rentals are subject to approval.




Layer 3 24-Port 10/100/1000T + 4-Port 10G SFP+ Stackable Managed Switch

Physical Port

  • 24-port 10/100/1000BASE-T RJ45 copper
  • 4 100/1000BASE-X mini-GBIC/SFP slots, shared with Port-21 to Port-24
  • 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
  • RJ45 to RS232 console interface for switch basic management and setup
  • 1 RJ45 Ethernet management port for switch basic management and setup
  • 1 USB 2.0 for backup/upload configuration and firmware upgrade


IP Stacking

  • Connects with stack member via both Gigabit TP and SFP interfaces
  • Single IP address management, supporting up to 24 units stacked together


IP Routing Features

  • IP routing protocol supports RIPv1/v2RIPngOSPFv2/v3BGP4/4+
  • Routing interface provides per VLAN routing mode

  • VRRPv1/v3 protocol for redundant routing deployment
  • Supports route redistribution


Multicast Routing Features

  • Supports PIM-DM (Protocol Independent Multicast – Dense Mode) and PIM-SM (Protocol Independent Multicast – Sparse Mode) and PIM-SSM (Protocol Independent Multicast – Source Specific Multicast)
  • Supports DVMRP (Distance Vector Multicast Routing Protocol)
  • Supports IGMP v1/v2/v3 and MLD v1/v2


Layer 2 Features

  • Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet standard
  • Supports auto-negotiation and half-duplex/full-duplex modes for all 10BASE-T, 100BASE-TX and 1000BASE-T ports
  • Auto-MDI/MDI-X detection on each RJ45 port
  • Prevents packet loss flow control
  • – IEEE 802.3x pause frame flow control in full-duplex mode

    – Back-pressure flow control in half-duplex mode
  • High performance Store-and-Forward architecture, broadcast storm control, port loopback detect
  • 16K MAC address table, automatic source address learning and aging
  • Supports VLAN
  • – IEEE 802.1Q tag-based VLAN- GVRP for dynamic VLAN management

    – Up to 256 VLANs groups, out of 4041 VLAN IDs
    – Provider Bridging (VLAN Q-in-Q, IEEE 802.1ad) supported- Private VLAN Edge (PVE) supported
    – GVRP protocol for Management VLAN
    – Protocol-based VLAN
    – MAC-based VLAN
    – IP subnet VLAN

  • Supports Link Aggregation
  • – Maximum 12 trunk groups, up to 8 ports per trunk group- IEEE 802.3ad LACP (Link Aggregation Control Protocol)

    – Cisco ether-channel (static trunk)

  • Supports Spanning Tree Protocol
  • – STP, IEEE 802.1D (Classic Spanning Tree Protocol)

    – RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
    – MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol, spanning tree by VLAN)
    – Supports BPDU & root guard

  • Port mirroring to monitor the incoming or outgoing traffic on a particular port (many to many)
  • Provides port mirror (many-to-1)


Quality of Service

  • 8 priority queues on all switch ports
  • Support for strict priority and WRR (Weighted Round Robin) CoS policies
  • Traffic classification
  • – IEEE 802.1p CoS/ToS

    – IPv4/IPv6 DSCP
    – Port-based WRR

  • Strict priority and WRR CoS policies



  • Supports IPv4 IGMP snooping v1, v2 and v3; IPv6 MLD v1 and v2 snooping
  • Querier mode supports
  • Supports Multicast VLAN Register (MVR)



  • IEEE 802.1x port-based network access authentication
  • MAC-based network access authentication
  • Built-in RADIUS client to cooperate with the RADIUS servers for IPv4 and IPv6
  • TACACS+ login users access authentication
  • IP-based Access Control List (ACL)
  • MAC-based Access Control List
  • Supports DHCP snooping
  • Supports ARP inspection
  • IP Source Guard prevents IP spoofing attacks
  • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding



  • Management IP for IPv4 and IPv6
  • Switch Management Interface
  • – Console/Telnet Command Line Interface

    – Web switch management
    – SNMP v1, v2c and v3 switch management
    – SSH/SSL secure access

  • BOOTP and DHCP for IP address assignment
  • Firmware upload/download via TFTP or HTTP Protocol for IPv4 and IPv6
  • SNTP (Simple Network Time Protocol) for IPv4 and IPv6
  • User privilege levels control
  • Syslog server for IPv4 and IPv6
  • Supports DDM
  • Four RMON groups 1, 2, 3, 9 (history, statistics, alarms and events)
  • Supports sFlow
  • Supports ULDP
  • Supports ULPP (Uplink Protection Protocol)
  • Supports ULSM (Uplink State Monitor protocol)
  • Supports LLDP/LLDP MED
  • Supports DHCP Option82, Option37/38
  • Supports ping, trace route function for IPv4 and IPv6


    Hardware Specifications
    Hardware Version 3
    Copper Ports 24 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
    SFP/Mini-GBIC Slots 4 100/1000BASE-X SFP combo interfaces with Port-21 to Port-24
    Supports 100/1000Mbps dual mode and DDM
    SFP+ Slots 4 10GBASE-SR/LR SFP+ interface (port-25 to port-28)
    Compatible with 1000BASE-SX/LX/BX SFP transceiver
    Console 1 x RJ45-to-RS232 serial port (115200, 8, N, 1)
    Switch Architecture Store-and-Forward
    Switch Fabric 128Gbps/non-blocking
    Switch Throughput 95.23Mpps
    Address Table 16K MAC address table with auto learning function
    Shared Data Buffer 1.5MB
    Flow Control Back pressure for half -duplex
    IEEE 802.3x pause frame for full -duplex
    Jumbo Frame 10K
    LED System:
    10/100/1000T RJ45 Port: LNK/ACT
    1/10G SFP+ slot: LNK/ACT
    Dimensions (W x D x H) 440 x 320 x 43.6 mm, 1U height
    Weight 4503g
    Power Consumption 12 watts/41.17 BTU (System)
    27 watts/92.64 BTU (Ethernet full loading)
    Power Requirements AC 100~240V, 50/60Hz
    Management Function
    System Configuration Console, Telnet, SSH, Web browser, SNMP v1, v2c and v3
    Management Supports both IPv4 and IPv6 addressing
    Supports the user IP security inspection for IPv4/IPv6 SNMP
    Supports MIB and TRAP
    Supports IPv4/IPv6 FTP/TFTP
    Supports IPv4/IPv6 NTP
    Supports RMON 1, 2, 3, 9 four groups
    Supports the RADIUS authentication for IPv4/IPv6 Telnet user name and password
    Supports IPv4/IPv6 SSH
    The right configuration for users to adopt RADIUS server’s shell management
    Supports CLI, console, Telnet
    Supports SNMP v1, v2c and v3
    Supports Security IP safety net management function: avoid unlawful landing at nonrestrictive area
    Supports Syslog server for IPv4 and IPv6
    Supports TACACS+
    IPv4 Layer 3 Functions
    IP Routing Protocol ■ Static Routing
    ■ RIPv1/v2
    ■ OSPFv2
    ■ BGP4
    ■ Policy-based Routing(PBR)
    ■ LPM Routing
    Multicast Routing Protocol ■ IGMP v1/v2/v3
    ■ IGMP Proxy
    ■ DVMRP
    ■ PIM-DM
    ■ PIM-SM
    ■ PIM-SSM
    ■ Any Cast RP
    ■ MSDP
    ■ Illegal Multicast Source Detect
    Layer 3 Protocol ■ VRRP
    ■ URPF
    ■ ECMP
    ■ BFD
    Routing Interface Per VLAN
    IPv6 Layer 3 Functions
    IP Routing Protocol ■ RIPng
    ■ OSPFv3
    ■ BGP4+
    ■ IPv6 LPM Routing
    ■ IPv6 Policy-based Routing(PBR)
    Multicast Routing Protocol ■ MLD Snooping
    ■ IPv6 Muticast VLAN
    ■ MLDv1/v2
    ■ PIM-SM/DM for IPv6
    ■ IPv6 Any Cast RP
    ■ IPv6 ACL
    ■ IPv6 QoS
    Layer 3 Protocol ■ IPv6 VRRPv3
    ■ IPv6 URPF
    ■ IPv6 RA
    ■ 6to4 Tunnel
    ■ Configured Tunnel
    ■ ISATAP Tunnel
    ■ GRE Tunnel
    ■ ICMPv6
    ■ ND,DNSv6
    Layer 2 Functions
    Port Configuration Port disable/enable
    Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
    Flow control disable/enable
    Bandwidth control on each port
    Port loopback detect
    Port Status Display each port’s speed duplex mode, link status, flow control status and
    auto negotiation status
    VLAN 802.1Q tagged based VLAN, up to 256 VLAN groups
    802.1ad Q-in-Q (VLAN stacking)
    GVRP for VLAN management
    Private VLAN Edge (PVE) supported
    Protocol-based VLAN
    MAC-based VLAN
    IP subnet VLAN
    Bandwidth Control TX/RX/Both
    Link Aggregation IEEE 802.3ad LACP/static trunk
    Supports 12 groups with 8 ports per trunk group
    QoS 8 priority queues on all switch ports
    Supports strict priority and Weighted Round Robin (WRR) CoS policies
    Traffic classification:
    – IEEE 802.1p CoS/ToS
    – IPv4/IPv6 DSCP
    – Port-based WRR
    Multicast IGMP v1/v2/v3 snooping
    Querier mode support
    MLD v1/v2 snooping
    Multicast VLAN Register (MVR)
    Access Control List Supports Standard and Expanded ACL
    IP-based ACL/MAC-based ACL
    Time-based ACL
    Up to 512 entries
    Bandwidth Control At least 64Kbps step
    Security Supports MAC + port binding
    IPv4/IPv6 + MAC + port binding
    IPv4/IPv6 + port binding
    Supports MAC filter
    ARP scanning prevention
    Authentication IEEE 802.1x port-based network access control
    AAA authentication: TACACS+ and IPv4/IPv6 over RADIUS
    RFC 1215 Internet Engineering Task Force
    RFC 1271 RMON
    RFC 1354 IP-Forwarding MIB
    RFC 1493 Bridge MIB
    RFC 1643 Ether-like MIB
    RFC 1907 SNMP v2
    RFC 2011 IP/ICMP MIB
    RFC 2012 TCP MIB
    RFC 2013 UDP MIB
    RFC 2096 IP forward MIB
    RFC 2233 if MIB
    RFC 2452 TCP6 MIB
    RFC 2454 UDP6 MIB
    RFC 2465 IPv6 MIB
    RFC 2466 ICMP6 MIB
    RFC 2573 SNMP v3 notify
    RFC 2574 SNMP v3 vacm
    RFC 2674 Bridge MIB Extensions (IEEE 802.1Q MIB)
    RFC 2674 Bridge MIB Extensions (IEEE 802.1P MIB)
    Standards Conformance
    Regulatory Compliance FCC Part 15 Class A, CE
    Standards Compliance IEEE 802.3 10BASE-T
    IEEE 802.3u 100BASE-TX
    IEEE 802.3z Gigabit 1000BASE-SX/LX
    IEEE 802.3ab Gigabit 1000BASE-T
    IEEE 802.3ae 10Gb/s Ethernet
    IEEE 802.3x flow control and back pressure
    IEEE 802.3ad port trunk with LACP
    IEEE 802.1D Spanning Tree Protocol
    IEEE 802.1w Rapid Spanning Tree Protocol
    IEEE 802.1s Multiple Spanning Tree Protocol
    IEEE 802.1p Class of Service
    IEEE 802.1Q VLAN tagging
    IEEE 802.1X port authentication network control
    IEEE 802.1ab LLDP
    RFC 768 UDP
    RFC 793 TFTP
    RFC 791 IP
    RFC 792 ICMP
    RFC 2068 HTTP
    RFC 1112 IGMP v1
    RFC 2236 IGMP v2
    RFC 3376 IGMP v3
    RFC 2710 MLD v1
    FRC 3810 MLD v2
    RFC 2328 OSPF v2
    RFC 1058 RIP v1
    RFC 2453 RIP v2
    Operating Temperature: 0 ~ 50 degrees C
    Relative Humidity: 5 ~ 90% (non-condensing)
    Storage Temperature: -10 ~ 70 degrees C
    Relative Humidity: 5 ~ 90% (non-condensing)
Right Menu Icon