Description
PIR-T40NAM
Takex High Performance Triple Mirror PIR Sensor
The high-performance PIR-T sensor range provides unparalleled versatility in detection.
Utilising precision triple mirror optics and intelligent signal processing, it ensures precise detection within a mounting range of 2m to 6m.
Datasheet:
PIR-T40NAM
| Feature | Specification |
|---|---|
| Detection System | Passive infrared |
| Coverage | Vertical curtain protection |
| Detection Distance | Max 150’ (45m) |
| Sensitive Zone | 46 zones (23 pairs) |
| Mounting Height | 6.6’ to 20’ (2.0 to 6.0m) (varies depending on operation mode) |
| – Low Position Mode: 6.6’ to 8.3’ (2.0 to 2.5m) | |
| (Max Detection Distance: 135’ (40m)) | |
| – Middle Position Mode: 8.3’ to 11.5’ (2.5 to 3.5m) | |
| (Max Detection Distance: 115’ (35m)) | |
| – High Position Mode: 11.5’ to 13’ (3.5 to 4.0m) | |
| (Max Detection Distance: 100’ (30m)) | |
| – High Density Mode: 6.6’ to 20’ (2.0 to 6.0m) | |
| (Max Detection Distance: 150’ (45m)) | |
| Area Adjustment | Horizontal: ±90° (in 5° steps) |
| Vertical: 17° (no stage adjustment) | |
| Supply Voltage | 9 to 28V DC (non-polarity) |
| Current Consumption | Max. 50mA |
| Alarm Output | Contact Method: Dry semi-conductor contact, N.C./N.O. selectable |
| Contact Operation: One-shot operation when detecting intrusion | |
| Contact Rating: 24V (AC/DC) 0.25A (resistive load) | |
| Alarm Output (2) | Contact Method: Dry semi-conductor contact N.O. |
| Contact Operation: One-shot/Off delay operation selectable | |
| Contact Rating: 24V (AC/DC) 0.25A (resistive load) | |
| Tamper Output | Contact Method: Dry mechanical contact, N.C. |
| Contact Operation: Continuous output | |
| Contact Rating: 24V (AC/DC) 0.1A (resistive load) | |
| Anti-Masking Output | Contact Method: Dry semi-conductor contact N.C. |
| Contact Operation: Continuous output until normal recovery | |
| Contact Rating: 24V (AC/DC) 0.25A (resistive load) | |
| LED Indicator | Red LED (Alarm): |
| – Blinks during warm-up | |
| – Lights up when detecting intrusion | |
| – Continuously blinks for errors (cover monitor, alignment position, | |
| self-diagnosis, power voltage, anti-masking) | |
| Red LED (Memory): | |
| – Blinks during memory display | |
| – Auto reset operation selectable | |
| Functions | Sensitivity selection |
| Operation mode selection | |
| Alarm memory LED | |
| Self-diagnosis | |
| Low voltage monitoring | |
| Temperature compensation | |
| Front & back tamper | |
| LED area checker | |
| Environmental adjustment | |
| Creep zone detection | |
| Walk test mode | |
| Near area cancellation | |
| Anti-masking | |
| Mounting Position | Indoor/outdoor wall surface* |
| *Can be mounted on poles and ceilings (or under eaves) using optional | |
| accessories | |
| Wiring | Terminals (M2.6 self-up terminal) |
| Weight | Approx. 600g |
| Appearance | Body: Resin (white) |
| Window: Resin (white) | |
| Environmental Specification | Ambient Temperature: -25 to +55°C (no condensation and freezing) |
| IP Rating: IP55 |
