Description
FS-1000E
Takex Flame Sensor
The FS-1000E sensor quickly detects ultraviolet rays contained in flames and activates a built-in alarm sound plus an open collector output.
- High sensitivity ultraviolet flame sensor
- Detachable base unit with snap-in-out sensor design
- Built-in sounder
- NO/NC relay output
- Adjustable response time
- Battery (2x AA type-3 alkaline) or DC operation
| Feature | Specification |
|---|---|
| Detection System | Ultraviolet rays detection (Detected wavelength 180~260nm) |
| Coverage | Distance: 33ft. (10m) (2.76″(7cm) lighter flame, in front) Angle: Approx. 120° conically |
| Supply Voltage | Type-AA alkaline battery (LR6) 2pcs / DC3V External wiring DC9 ～ 30V (Polarised) |
| Current Consumption | Standby: 50μA Max. when battery power supply, 5mA Max. when external power supply Alarm: 50mA Max. when buzzer sounds |
| Alarm Output | NPN open collector output (Useful as an output with voltage when external power is used) 30V (DC) 50mA, off-delay 10sec. continuous output |
| LED Indicator | Indication: Red LED LED Alarm: Flashing every 0.2sec. during off-delay approx. 10sec. Low battery: Light on 0.1sec. every approx. 5sec. |
| Buzzer | Alarm: Sounds intermittently every 0.2sec. during off-delay 10sec. Low battery: Sound 0.1sec. intermittently every approx. 5sec. Volume: 80dB or more 3.3ft. (1m) ahead (Silent setting is available by cutting internal jumper line) |
| Sensitivity Adjustment | Detection sensitivity (H[100%], L[50%]) Detection timer (1sec., 6sec., 15sec., 30sec.,) |
| Mounting Position | Indoor (Ceiling or wall mount) |
| Wiring | Terminals |
| Weight | Approx. 7oz (200g) including battery (accessory) 1.8oz (50g) |
| Appearance | ABS resin (white) |
| Ambient Temperature | +14°F to +140°F (-10°C to +60°C) without condensation Battery performance may decrease under +32°F (0°C) or beyond +104°F (+40°C) |
