Description
IGS-20040MT
Industrial L2+ 16-Port 10/100/1000T + 4-Port 100/1000X SFP Managed Switch
Physical Port
- 16-Port 10/100/1000BASE-Tย RJ45 copper
- 4 100/1000BASE-X mini-GBIC/SFPย slots, SFP type auto detection
- One RJ45 console interface for basic management and setup
Industrial Hardened Design
-
- Dual power input, redundant power with reverse polarity protection
–ย DC 9 to 48 input or AC 24V input
- –ย Active-active redundant power failure protection
- –ย Backup of catastrophic power failure on one supply
- –ย Fault tolerance and resilience
- DIN-rail and wall-mountable designs
- IP30 aluminum case
- Supports 6000V DC Ethernet ESD protection
- -40 to 75 degrees C operating temperature
Industrial Protocol
- Modbus TCP for real-time monitoring inย SCADA system
- IEEE 1588v2 PTP (Precision Time Protocol)
Digital Input and Digital Output
- 2 Digital Input (DI)
- 2 Digital Output (DO)
- Integrates sensors into auto alarm system
- Transfers alarm to IP network via email and SNMP trap
Layer 3 IP Routing Features
- Supports maximum 32 static routes and route summarization
Layer 2 Features
-
- High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
- Storm Control support
– Broadcast/multicast/unknown unicast
-
- Supportsย VLAN
– IEEE 802.1Q tagged VLAN
- – Up to 255 VLANs groups, out of 4095 VLAN IDs
- – Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
- – Private VLAN Edge (PVE)
- – Protocol-based VLAN
- – MAC-based VLAN
- – Voice VLAN
- –ย GVRP (GARP VLAN Registration Protocol)
-
- Supportsย Spanning Tree Protocol
– IEEE 802.1D Spanning Tree Protocol (STP)
- – IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- – IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) by VLAN
-
- – BPDU Guard
- Supportsย Link Aggregation
–ย 802.3ad Link Aggregation Control Protocol (LACP)
- – Cisco ether-channel (static trunk)
- –ย Maximum 10 trunk groups, up to 8 ports per trunk group
- – Up to 16Gbps bandwidth (duplex mode)
- Provides port mirror (many-to-1)
- Port Mirroring of the incoming or outgoing traffic on a particular port
- Loop protection to avoid broadcast loops
- Supports E.R.P.S.ย (Ethernet Ring Protection Switching)
- IEEE 1588 and Synchronous Ethernet network timing
- Compatible with Cisco Uni-directional link detection (UDLD) that monitors a link between two switches and blocks the ports on both ends of the link if the link fails at any point between the two devices
- Link Layer Discovery Protocol (LLDP)
Quality of Service
-
- Ingress Shaper and Egress Rate Limit per port bandwidth control
- 8 priority queues on all switch ports
- Traffic classification
– IEEE 802.1p CoS
- –ย IP TOS/DSCP/IP Precedence
- –ย IP TCP/UDP port number
- –ย Typical network application
- Strict priority and Weighted Round Robin (WRR) CoS policies
- Supports QoS and In/Out bandwidth control on each port
- Traffic-policing policies on the switch port
- DSCP remarking
Multicast
- Supports IPv4 IGMP Snooping v1, v2 and v3
- Supports IPv6 MLD Snooping v1 and v2
- Querier mode support
- IPv4 IGMP Snooping port filtering
- IPv6 MLD Snooping port filtering
- MVR (Multicast VLAN Registration)
Security
-
- Authentication
–ย IEEE 802.1x Port-based/MAC-based network access authentication
- –ย Built-in RADIUS client to cooperate with the RADIUS servers
- –ย TACACS+ login users access authentication
- –ย RADIUS/TACACS+ users access authentication
-
- Access Control List
–ย IP-based Access Control List (ACL)
- –ย MAC-based Access Control List (ACL)
- Source MAC/IP address binding
- DHCP Snooping to filter un-trusted DHCP messages
- Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
- IP Source Guard prevents IP spoofing attacks
- Auto DoS rule to defend DoS attack
- IP address access management to prevent unauthorized intruder
Management
-
- IPv4 and IPv6 dual stack management
- Switch management interfaces
– Console/Telnet command line interface
- – Web switch management
- – SNMP v1, v2c, and v3 switch management
-
- –ย SSH, TLS and SNMP v3 secure access
- SNMP Management
–ย Four RMON groups (history, statistics, alarms, and events)
-
- –ย SNMP trap for interface Link Up and Link Down notification
- IPv6ย IP address/NTP/DNS management
- Built-in Trivial File Transfer Protocol (TFTP) client
- BOOTP and DHCP for IP address assignment
- System Maintenance
–ย Firmware upload/download via HTTP/TFTP
- –ย Reset button for system reboot or reset to factory default
-
- –ย Dual Images
- DHCP Relay and DHCP Option 82
- DHCP Server
- User Privilege levels control
- Network Time Protocol (NTP)
- Network Diagnositc
–ย ICMPv6/ICMPv4 Remote Ping
- –ย Cable diagnostic technology provides the mechanism to detect and report potential cabling issues
- –ย SFP-DDM (Digital Diagnostic Monitor)
- SMTP/Syslog remote alarm
- System Log
- PLANET NMS system and Smart Discovery Utility for deployment management
Datasheet:
