Planet 24-Port 10/100/1000T + 4-Port 10G SFP+ Stackable Managed Switch, 95.23Mpps, Power Requirements-AC 100~240V, 50/60Hz

Description

XGS3-24042

Layer 3 24-Port 10/100/1000T + 4-Port 10G SFP+ Stackable Managed Switch

Physical Port

• 24-port 10/100/1000BASE-T RJ45 copper
• 4 100/1000BASE-X mini-GBIC/SFP slots, shared with Port-21 to Port-24
• 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
• RJ45 to RS232 console interface for switch basic management and setup
• 1 RJ45 Ethernet management port for switch basic management and setup
• 1 USB 2.0 for backup/upload configuration and firmware upgrade

IP Stacking

• Connects with stack member via both Gigabit TP and SFP interfaces
• Single IP address management, supporting up to 24 units stacked together

IP Routing Features

• IP routing protocol supports RIPv1/v2, RIPng, OSPFv2/v3, BGP4/4+

Routing interface provides per VLAN routing mode

• VRRPv1/v3 protocol for redundant routing deployment
• Supports route redistribution

Multicast Routing Features

• Supports PIM-DM (Protocol Independent Multicast – Dense Mode) and PIM-SM (Protocol Independent Multicast – Sparse Mode) and PIM-SSM (Protocol Independent Multicast – Source Specific Multicast)
• Supports DVMRP (Distance Vector Multicast Routing Protocol)
• Supports IGMP v1/v2/v3 and MLD v1/v2

Layer 2 Features

• Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet standard
• Supports auto-negotiation and half-duplex/full-duplex modes for all 10BASE-T, 100BASE-TX and 1000BASE-T ports
• Auto-MDI/MDI-X detection on each RJ45 port
• Prevents packet loss flow control

– IEEE 802.3x pause frame flow control in full-duplex mode

– Back-pressure flow control in half-duplex mode

• High performance Store-and-Forward architecture, broadcast storm control, port loopback detect
• 16K MAC address table, automatic source address learning and aging
• Supports VLAN

– IEEE 802.1Q tag-based VLAN- GVRP for dynamic VLAN management

– Up to 256 VLANs groups, out of 4041 VLAN IDs

– Provider Bridging (VLAN Q-in-Q, IEEE 802.1ad) supported- Private VLAN Edge (PVE) supported

– GVRP protocol for Management VLAN

– Protocol-based VLAN

– MAC-based VLAN

– IP subnet VLAN
• Supports Link Aggregation

– Maximum 12 trunk groups, up to 8 ports per trunk group- IEEE 802.3ad LACP (Link Aggregation Control Protocol)

– Cisco ether-channel (static trunk)
• Supports Spanning Tree Protocol

– STP, IEEE 802.1D (Classic Spanning Tree Protocol)

– RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)

– MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol, spanning tree by VLAN)

– Supports BPDU & root guard
• Port mirroring to monitor the incoming or outgoing traffic on a particular port (many to many)
• Provides port mirror (many-to-1)

Quality of Service

• 8 priority queues on all switch ports
• Support for strict priority and WRR (Weighted Round Robin) CoS policies
• Traffic classification

– IEEE 802.1p CoS/ToS

– IPv4/IPv6 DSCP

– Port-based WRR
• Strict priority and WRR CoS policies

Multicast

• Supports IPv4 IGMP snooping v1, v2 and v3; IPv6 MLD v1 and v2 snooping
• Querier mode supports
• Supports Multicast VLAN Register (MVR)

Security

• IEEE 802.1x port-based network access authentication
• MAC-based network access authentication
• Built-in RADIUS client to cooperate with the RADIUS servers for IPv4 and IPv6
• TACACS+ login users access authentication
• IP-based Access Control List (ACL)
• MAC-based Access Control List
• Supports DHCP snooping
• Supports ARP inspection
• IP Source Guard prevents IP spoofing attacks
• Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding

Management

• Management IP for IPv4 and IPv6
• Switch Management Interface

– Console/Telnet Command Line Interface

– Web switch management

– SNMP v1, v2c and v3 switch management

– SSH/SSL secure access
• BOOTP and DHCP for IP address assignment
• Firmware upload/download via TFTP or HTTP Protocol for IPv4 and IPv6
• SNTP (Simple Network Time Protocol) for IPv4 and IPv6
• User privilege levels control
• Syslog server for IPv4 and IPv6
• Supports DDM
• Four RMON groups 1, 2, 3, 9 (history, statistics, alarms and events)
• Supports sFlow
• Supports ULDP
• Supports ULPP (Uplink Protection Protocol)
• Supports ULSM (Uplink State Monitor protocol)
• Supports LLDP/LLDP MED
• Supports DHCP Option82, Option37/38
• Supports ping, trace route function for IPv4 and IPv6

   
  Specifications:
   

  

  Hardware Specifications
  Hardware Version	3
  Copper Ports	24 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
  SFP/Mini-GBIC Slots	4 100/1000BASE-X SFP combo interfaces with Port-21 to Port-24 Supports 100/1000Mbps dual mode and DDM
  SFP+ Slots	4 10GBASE-SR/LR SFP+ interface (port-25 to port-28) Compatible with 1000BASE-SX/LX/BX SFP transceiver
  Console	1 x RJ45-to-RS232 serial port (115200, 8, N, 1)
  Switch Architecture	Store-and-Forward
  Switch Fabric	128Gbps/non-blocking
  Switch Throughput	95.23Mpps
  Address Table	16K MAC address table with auto learning function
  Shared Data Buffer	1.5MB
  Flow Control	Back pressure for half -duplex IEEE 802.3x pause frame for full -duplex
  Jumbo Frame	10K
  LED	System: PWR/MGMT/SYS Ports: 10/100/1000T RJ45 Port: LNK/ACT 1/10G SFP+ slot: LNK/ACT
  Dimensions (W x D x H)	440 x 320 x 43.6 mm, 1U height
  Weight	4503g
  Power Consumption	12 watts/41.17 BTU (System) 27 watts/92.64 BTU (Ethernet full loading)
  Power Requirements	AC 100~240V, 50/60Hz
  Management Function
  System Configuration	Console, Telnet, SSH, Web browser, SNMP v1, v2c and v3
  Management	Supports both IPv4 and IPv6 addressing Supports the user IP security inspection for IPv4/IPv6 SNMP Supports MIB and TRAP Supports IPv4/IPv6 FTP/TFTP Supports IPv4/IPv6 NTP Supports RMON 1, 2, 3, 9 four groups Supports the RADIUS authentication for IPv4/IPv6 Telnet user name and password Supports IPv4/IPv6 SSH The right configuration for users to adopt RADIUS server’s shell management Supports CLI, console, Telnet Supports SNMP v1, v2c and v3 Supports Security IP safety net management function: avoid unlawful landing at nonrestrictive area Supports Syslog server for IPv4 and IPv6 Supports TACACS+
  IPv4 Layer 3 Functions
  IP Routing Protocol	■ Static Routing ■ RIPv1/v2 ■ OSPFv2 ■ BGP4 ■ Policy-based Routing(PBR) ■ LPM Routing
  Multicast Routing Protocol	■ IGMP v1/v2/v3 ■ IGMP Proxy ■ DVMRP ■ PIM-DM ■ PIM-SM ■ PIM-SSM ■ Any Cast RP ■ MSDP ■ Illegal Multicast Source Detect
  Layer 3 Protocol	■ VRRP ■ URPF ■ ECMP ■ BFD
  Routing Interface	Per VLAN
  IPv6 Layer 3 Functions
  IP Routing Protocol	■ RIPng ■ OSPFv3 ■ BGP4+ ■ IPv6 LPM Routing ■ IPv6 Policy-based Routing(PBR)
  Multicast Routing Protocol	■ MLD Snooping ■ IPv6 Muticast VLAN ■ MLDv1/v2 ■ PIM-SM/DM for IPv6 ■ IPv6 Any Cast RP ■ IPv6 ACL ■ IPv6 QoS
  Layer 3 Protocol	■ IPv6 VRRPv3 ■ IPv6 URPF ■ IPv6 RA ■ 6to4 Tunnel ■ Configured Tunnel ■ ISATAP Tunnel ■ GRE Tunnel ■ ICMPv6 ■ ND,DNSv6
  Layer 2 Functions
  Port Configuration	Port disable/enable Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow control disable/enable Bandwidth control on each port Port loopback detect
  Port Status	Display each port’s speed duplex mode, link status, flow control status and auto negotiation status
  VLAN	802.1Q tagged based VLAN, up to 256 VLAN groups 802.1ad Q-in-Q (VLAN stacking) GVRP for VLAN management Private VLAN Edge (PVE) supported Protocol-based VLAN MAC-based VLAN IP subnet VLAN
  Bandwidth Control	TX/RX/Both
  Link Aggregation	IEEE 802.3ad LACP/static trunk Supports 12 groups with 8 ports per trunk group
  QoS	8 priority queues on all switch ports Supports strict priority and Weighted Round Robin (WRR) CoS policies Traffic classification: – IEEE 802.1p CoS/ToS – IPv4/IPv6 DSCP – Port-based WRR
  Multicast	IGMP v1/v2/v3 snooping Querier mode support MLD v1/v2 snooping Multicast VLAN Register (MVR)
  Access Control List	Supports Standard and Expanded ACL IP-based ACL/MAC-based ACL Time-based ACL Up to 512 entries
  Bandwidth Control	At least 64Kbps step
  Security	Supports MAC + port binding IPv4/IPv6 + MAC + port binding IPv4/IPv6 + port binding Supports MAC filter ARP scanning prevention
  Authentication	IEEE 802.1x port-based network access control AAA authentication: TACACS+ and IPv4/IPv6 over RADIUS
  SNMP MIBs	RFC 1213 MIB-II RFC 1215 Internet Engineering Task Force RFC 1271 RMON RFC 1354 IP-Forwarding MIB RFC 1493 Bridge MIB RFC 1643 Ether-like MIB RFC 1907 SNMP v2 RFC 2011 IP/ICMP MIB RFC 2012 TCP MIB RFC 2013 UDP MIB RFC 2096 IP forward MIB RFC 2233 if MIB RFC 2452 TCP6 MIB RFC 2454 UDP6 MIB RFC 2465 IPv6 MIB RFC 2466 ICMP6 MIB RFC 2573 SNMP v3 notify RFC 2574 SNMP v3 vacm RFC 2674 Bridge MIB Extensions (IEEE 802.1Q MIB) RFC 2674 Bridge MIB Extensions (IEEE 802.1P MIB)
  Standards Conformance
  Regulatory Compliance	FCC Part 15 Class A, CE
  Standards Compliance	IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3z Gigabit 1000BASE-SX/LX IEEE 802.3ab Gigabit 1000BASE-T IEEE 802.3ae 10Gb/s Ethernet IEEE 802.3x flow control and back pressure IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN tagging IEEE 802.1X port authentication network control IEEE 802.1ab LLDP RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 RFC 3376 IGMP v3 RFC 2710 MLD v1 FRC 3810 MLD v2 RFC 2328 OSPF v2 RFC 1058 RIP v1 RFC 2453 RIP v2
  Environment
  Operating	Temperature: 0 ~ 50 degrees C Relative Humidity: 5 ~ 90% (non-condensing)
  Storage	Temperature: -10 ~ 70 degrees C Relative Humidity: 5 ~ 90% (non-condensing)