Description
PXB-100HF
Takex Photoelectric Beam Sensor
Datasheet:
PXB-100HF
- Double modulated beams are designed to distinguish the external lights. It increases the reliability in the outdoor security system. (50,000 lux light immunity)
- The beam power is 100 times of the minimum requirement. The beam distance is 10 times of the described specification. This high power beam maintains the ability to operate reliably in inclement weather.
- The pitch between upper and lower beam is wider than previous models; drastically reducing False alarms initiated by birds and falling leaves.
- Water tight bushings and seals maintain device integrity from water, insects, and dust; further inclusion of a breathable membrane prevents internal condensation from affecting performance.
- Anti-bird Spike to keep birds and small animals from roosting on the sensor, maintaining a clear detection path for increased reliability.
- Drip-proof housing to channel the elements (rain and snow melt) away from the optical surfaces of the sensor, avoiding false alarms caused by beam attenuation.
| Parameter | PXB-100HF |
|---|---|
| Detection system | Near infrared pulsed beam interruption system (TR-RE 4 beam simultaneous interruption) |
| Infrared beam | Double Modulation LED pulse train |
| Protection distance | Outdoor 330′ (100m) or less |
| Max. arrival distance | 3300′ (1000m) |
| Response time | 0.05sec. to 0.7sec. (Variable at pot) |
| Power supply | 12 to 30V DC (Non-polarity) |
| Current consumption | 32mA or less |
| Alarm output | Dry contact relay output form C Contact action : Interruption time(Min.2sec.) Contact capacity : 30V (AC/DC) 0.25A (resistive load) Protective resistor |
| Environmental output | Dry contact relay output form C Action : Activated when weather condition gets worse Contact capacity : 30V (AC/DC) 0.25A (resistive load) Protective resistor |
| Tamper output | Dry contact relay (N.C.) Action : Activated when cover is detached Contact capacity : 30V (AC/DC) 0.1A (resistive load) Protective resistor |
| Alarm LED | Red LED (Receiver) ON : when an alarm is initiated |
| Attenuation LED | Red LED (Receiver) ON : when beam is attenuated |
| Ambient temperature range | -31°F to 151°F (-35° to 66°) |
| Beam adjustment | Horizontal: ±90°, Vertical: ±20° |
| Functions | Modulated beam frequency selection, Tone indicator, Environmental module Beam power selection, Transmitting power adjustment, Alarm memory indication, Programmed AGC, Auto-gain lock function, Monitor jack, Tamper, Response time adjustment, Upper / Lower beam switch, Wireless Alignment Checker connecting function |
| Mounting positions | Outdoor, Indoor |
| Wiring | Terminals |
| Weight | Transmitter: 49oz (1400g) Receiver: 51.5oz (1470g) |
| Appearance | PC resin (wine red) |
| Accessory | Pole attachment, Anti-Bird spike, Screws, Instruction manual |
