Description
PIR-T15AM
Takex High Performance Triple Mirror PIR Sensor
The high-performance PIR-T sensor range provides unparalleled versatility in detection.
Utilising precision triple mirror optics and intelligent signal processing, it ensures precise detection within a mounting range of 2m to 6m.
Datasheet:
PIR-T15AM
| Specifications | Details |
|---|---|
| Detection system | Passive infrared |
| Coverage | Wide angle (80°) detection |
| Detection distance: 49’ (15m) | |
| Sensitive zone | 108 zones (54 pairs) |
| Mounting height | 6.6’ to 20’ (2.0 to 6.0m) (varies depending on the operation mode) |
| – Low position mode: 6.6’ to 9’ (2.0 to 2.7m) | |
| – High position mode: 9’ to 11.5’ (2.7 to 3.5m) | |
| – Pet mode: 8.3’ to 10’ (2.5 to 3.0m) | |
| – High density mode: 6.6’ to 20’ (2.0 to 6.0m) | |
| Area adjustment | Horizontal direction: ±45° (in 5° steps) |
| Vertical direction: 17° (no stage adjustment) | |
| Supply voltage | 9 to 28V DC (non-polarity) |
| Current consumption | Max. 40mA |
| Alarm output | – Contact method: Dry semi-conductor contact, N.C./N.O. selectable |
| – Contact operation: One-shot operation when detecting intrusion | |
| – Continuous output in the event of cover monitor error | |
| – Continuous output in the event of alignment position error | |
| – Continuous output in the event of self-diagnosis error | |
| – Continuous output in the event of power voltage error | |
| – Continuous output in the event of long-term diagnosis error | |
| – Contact rating: 24V (AC/DC) 0.25A (resistive load) | |
| (built-in contact protective resistor 3.3Ω) | |
| Alarm output (2) | – Contact method: Dry semi-conductor contact N.O. |
| – Contact operation: One-shot operation/Off delay operation selectable when detecting intrusion | |
| – Contact rating: 24V (AC/DC) 0.25A (resistive load) | |
| (built-in contact protective resistor 3.3Ω) | |
| Tamper output | – Contact method: Dry mechanical contact, N.C. |
| – Contact operation: Continuous output | |
| – Contact rating: 24V (AC/DC) 0.1A (resistive load) | |
| (built-in contact protective resistor 3.3Ω) | |
| Anti-masking output | – Contact method: Dry semi-conductor contact N.C. |
| – Contact operation: Continuously output when an object is placed in front of the lens (until normal recovery) | |
| – Contact rating: 24V (AC/DC) 0.25A (resistive load) | |
| (built-in contact protective resistor 3.3Ω) | |
| LED indicator | – Red LED (Alarm): Blinks during warm-up |
| Lights up when detecting intrusion | |
| Continuously blinks in the event of cover monitor error | |
| Continuously lit in the event of alignment position error | |
| Continuously blinks in the event of self-diagnosis error | |
| Continuously lit in the event of power voltage error | |
| Continuously blinks in the event of anti-masking error | |
| (* ON/OFF selectable using the mode selector) | |
| – Red LED (Memory): Blinks for 3 minutes during memory display | |
| Auto reset operation either of continuous lighting for 47 minutes or blinking for 50 minutes selectable | |
| (Blinks to lights/blinks, ON/OFF selectable using the mode selector) | |
| Functions | Sensitivity selection |
| Operation mode selection | |
| Alarm memory LED | |
| Self-diagnosis | |
| Low voltage monitoring | |
| Temperature compensation | |
| LED area checker | |
| Front & back tamper | |
| Environmental adjustment | |
| Creep zone detection | |
| Walk test mode | |
| Near area cancellation | |
| Long-term diagnosis | |
| Anti-masking | |
| Mounting position | Indoor/outdoor wall surface* |
| * Can be mounted on poles and ceilings (or under eaves) using optional accessories | |
| Wiring | Terminals (M2.6 self-up terminal) |
| Weight | Approx. 600g |
| Appearance | Body: Resin (white) |
| Window: Resin (white) | |
| Environmental Specification | |
| Ambient temperature | -25 to +55ËšC (no condensation and freezing) |
| IP Rating | IP55 |
